Toshiba Dynabook E10 power jack repair

If your Toshiba Dynabook E10 only charges at an angle, or not at all, the charging socket has usually worked loose. We replace the socket and repair the board around it.

Toshiba Dynabook E10

Get a quote

Tell us which laptop you have and what it's doing. We'll reply with a price and a drop-off time.

Signs your Toshiba Dynabook E10 needs this repair

The charging light flickers when you move the cable
You have to hold the plug at an angle
The battery won't charge, although the charger works
The socket is loose, pushed in or burnt
A USB-C port charges with some cables but not others

Power jack repair on the Toshiba Dynabook E10

The Toshiba Dynabook E10 uses a barrel charger or USB-C, depending on the version. We test your charger first, then repair the socket, its cable or the charging circuit on the motherboard, whichever has failed.

Charging socket faults are common; we repair them on the board.

What we do

We open the laptop, remove the damaged socket and fit a new one, repairing any lifted pads on the board. Where the socket is on a separate cable or small board, we replace that part instead.

We test with your own charger before handing the laptop back.

How long it takes. Usually done the same day for common models.

Warranty

This Toshiba Dynabook E10 repair is covered by our 90-day warranty on parts and labour.

Other Toshiba Dynabook E10 repairs

Power jack repair for similar models

More about power jack repair, or see all Toshiba laptop repairs.